论携号转网行为的私法规制

以电信用户入网协议为切入点,电信用户的携号转网行为应受到《合同法》《消费者权益保护法》等私法规范的保护与限制。该行为引起的格式条款解释、合同终止、违约责任、损失赔偿等问题,不能仅靠《电信条例》等公法规范来调整。应当积极引导广大消费者用户以私法领域相关规定为依据,转变争议解决思维,拓宽纠纷处理途径,合理选择维权手段,以保护自身合法民事权益,与行业监管部门共同推动电信行业有序发展。     

基于GFU和分层LSTM的组群行为识别研究方法

提出一种以"关键人物"为核心，使用门控融合单元（GFU，Gated Fusion Unit）进行特征融合的组群行为识别框架，旨在解决两个问题：①组群行为信息冗余，重点关注关键人物行为特征，忽略无关人员对组群行为的影响；②组群内部交互行为复杂，使用GFU有效融合以关键人物为核心的交互特征，再通过LSTM时序建模成为表征能力更强的组群特征.最终，通过softmax分类器进行组群行为类别分类.该算法在排球数据集上取得了86.7%的平均识别率.     

车载空调控制器的新型按键旋钮溃缩设计

本文针对乘用车内部凸出物的法规要求对车载空调控制器的旋钮按键溃缩进行了研究和设计，描述了这种新型旋钮按键溃缩设计相对于目前常用的方案在成本、空间、可靠性等方面的优势。根据实际设计结果表明，本文所应用的新型旋钮按键溃缩设计能在成本与空间有限的情况下可靠的满足法规对乘用车内部凸出物的要求，为乘用车内部凸出物溃缩方案提供了新方向，值得我们推广应用。     

Low complexity quantum private queries protocol

Private information retrieval(PIR) is an important privacy protection issue of secure multi-party computation, but the PIR protocols based on classical cryptography are vulnerable because of new technologies,such as quantum computing and cloud computing. The quantum private queries(QPQ) protocols available, however, has a high complexity and is inefficient in the face of large database. This paper, based on the QKD technology which is mature now, proposes a novel QPQ protocol utilizing the key dilution and auxiliary parameter. Only N quits are required to be sent in the quantum channel to generate the raw key, then the straight k bits in the raw key are added bitwise to dilute the raw key, and a final key is consequently obtained to encrypt the database. By flexible adjusting of auxiliary parameters θ and k, privacy is secured and the query success ratio is improved. Feasibility and performance analyses indicate that the protocol has a high success ratio in first-trial query and is easy to implement, and that the communication complexity of O(N) is achieved.     

一种实用的多数据库量子信息检索协议

针对目前量子私有信息检索不能适用与云存储的多数据库问题,基于现在成熟的量子密钥分发方法,提出了一种适合在多数据库环境下,实用的量子私有信息检索协议。对于不同大小的数据库,协议可通过调节参数θ和k,在保证数据库安全及用户隐私的情况下,完成信息的检索。性能分析结果表明,协议的通信复杂度低,检索成功率高、易于实施。     

基于敏感度分析的机床关键几何误差元素辨识与评定

为了正确识别和判定机床关键几何误差元素对机床精度设计的影响,以PCV-620立式加工中心为研究对象,采用多体系统理论建立机床空间误差模型,从而得到机床几何误差元素与机床精度之间的关联函数。对空间误差模型进行灵敏度分析,获得机床各运动方向的局部灵敏度系数,完成机床关键几何误差元素的初步辨识。以局部灵敏度系数为基础,提出一种与局部灵敏度系数和工作空间中任意位置处的几何误差元素值相关的全局灵敏度系数计算方法,将其作为机床关键几何误差元素的辨识和评定标准,分析得到PCV-620立式加工中心的关键几何误差元素包含3项定位误差、3项垂直度误差和5项直线度误差。     

基于DSP技术的配电房关键位置温度测量系统

目前配电房关键位置温度测量系统未设计温度智能标定程序,导致系统温度测量精度和正确率较低,为此提出设计基于DSP技术的配电房关键位置温度测量系统。硬件方面,考虑系统核心模块和测量性能,优化系统硬件结构和显示模块。软件方面,设计系统温度采集模块,采集配电房关键位置温度,设计温度测算程序和温度智能标定程序,智能测量配电房关键位置温度。实验结果表明:该系统受到外界温度因素影响较小,拟合曲线拟合度较高,具有较高的温度测量精度和正确率。     

Identification of Wiener systems based on the variable forgetting factor multierror stochastic gradient and the key term separation

The identification of Wiener systems is very difficult because of the output nonlinearity and the parameter product term. To identify the Wiener system, a novel stochastic gradient algorithm based on the multierror and the key term separation is proposed. Firstly, the Wiener system is parameterized as a pseudo-linear model to avoid the products of the parameters. Secondly, a parzen window is used to estimate the probability density function of the error. Thirdly, a stochastic information gradient algorithm with the multierror is adopted to estimate the parameters. The multierror takes the place of the scalar error by the stacked error, which accelerates the algorithm greatly. Fourthly, a variable forgetting factor considering errors is integrated to further speed the algorithm up. Finally, the proposed algorithm is validated by a numerical example and an industrial case. The estimation results indicate that the proposed algorithm can obtain accurate estimates with fast convergence speed.